MultiPod installed systems

View a selection of installed MultiPod systems.

storagepod installed systems

MultiPod system installed at MSD in London

Initially installed with two San Francisco StoragePods. The storage capacity was then grown with the addition of two more of the StoragePods and a pair of Dundee StoragePods.

MultiPod system with 3 San Francisco StoragePods installed in Boston, USA

Capacity for 720 shallow well plates or 216 1.4ml tube racks. The customer is also using our smaller Dundee StoragePods, flushed with nitrogen using the flush port on the front of the MultiPod Controller.

MultiPod system with 4 San Francisco StoragePods

Capacity for 960 shallow-well microplates or 288 1.4 ml tube racks. The StoragePods were installed using our stacking frames that allow two San Francisco StoragePods to be stacked on top of each other.

A MultiPod system with 9 San Francisco StoragePods.

One StoragePod is used for microplate storage. The other 8 StoragePods have custom removable trays for the storage of bottles and vials.

Starter MultiPod system

Purchased by a Boston based company this is a starter MultiPod system, ready to be expanded with additional StoragePods as and when required.

MultiPod system with 2 San Francisco StoragePods

Capacity for 480 shallow-well microplates or 144 1.4ml tube tracks. Now 5 years old and hasn’t broken down once!

MultiPod system with 8 San Francisco StoragePods

The system was purchased by a UK based start-up, initially with just two San Francisco StoragePods. The customer then subsequently added an additional two StoragePods each year to the current 8 in use. Capacity for 1,920 shallow-well microplates or 576 1.4ml tube racks.

MultiPod system with 2 San Francisco StoragePods and 3 Dundee StoragePods

The customer subsequently expanded the system with the addition of a third San Francisco StoragePod.

MultiPod system with 6 San Francisco StoragePods

Our stacking frames are used to stack the San Francisco StoragePods on top of each other. Capacity for 1,440 shallow-well microplates or 432 1.4ml tube racks.

MultiPod system installed at a major academic research institute in Germany

The customer started with two San Francisco StoragePods and then added an additional two StoragePods a couple of years later.

MultiPod system with 20 San Francisco StoragePods, installed onto stainless steel laboratory shelving

Automatic StoragePod environment monitoring and flushing.

Capacity for 4,800 shallow-well microplates.

MultiPod system with 5 San Francisco StoragePods

Capacity for 1,200 shallow-well microplates or 360 1.4ml tubes racks. The customer subsequently expanded the system with an additional 5 San Francisco StoragePods, doubling their storage capacity.

MultiPod system with 1 San Francisco StoragePod

Capacity for 240 shallow-well microplates.

Automatic StoragePod environment monitoring and flushing.

This system was purchased by a customers as a ‘starter kit’. Subsequently a further 6 San Francisco StoragePods were incrementally added to the system, increasing its capacity to 1,680 shallow-well microplates.

Two MultiPod systems, each connected to 20 San Francisco StoragePods (40 in total)

Capacity for 9,600 shallow-well microplates.

Automatic StoragePod environment monitoring and flushing.

The MultiPod Controllers are installed into the customer’s laboratory, next to a -20 °C walk in freezer room.

The StoragePods are installed inside the walk in freezer room, connected to the MultiPod controllers via transfer manifold in the freezer room wall.

MultiPod system with 2 San Francisco StoragePods

Capacity for 480 shallow-well microplates

Automatic StoragePod environment monitoring and flushing

This system was purchased by a customer as a ‘starter kit’. Subsequently a further 2 San Francisco StoragePods, 2 San Diego StoragePods and 2 Palm Springs StoragePods were incrementally added to the system.

Contact us

If you would like to discuss your system requirements with us further or have any queries, please contact us to arrange a call.

Contact us